PLASTIC HOT TUB WITH INTERNAL HEATER.
For optimum cosiness and atmosphere in a wood-fired outdoor swimming pool, Welltub has the Plastic hot tub with internal heater. An internal heater or indoor heater is in its entirety in the bath and just above the edge of the Hot Tub. The water can therefore never enter.
OPERATION OF THE INTERNAL WOOD STOVE
An internal heater or indoor heater is in the hot tub. For your safety, the heater is always placed behind a protection panel, so that you cannot touch the heater while bathing. The internal heater has the filling opening at the top. This always rises a few centimetres above the water surface so that water can never flow into it. With an internal stove it is the intention that you start burning at the bottom of the stove. At the same time, water flows along the aluminium heater, so the water is heated quickly. Our internal heaters are made of aluminium as standard because aluminium heats up the water much faster than stainless steel. Stainless steel has a much higher speed point than aluminium. The downside of this is of course that the aluminium stove is more vulnerable than stainless steel,
PLASTIC HOT TUB WITH INTERNAL HEATER OR EXTERNAL HEATER?
The difference with respect to an outdoor heater (external heater) is that the internal heater gives a little more atmosphere and cosiness while bathing. You will hear the burning and crackling of burning wood, you can top up the stove while bathing and you do not have to get out of the stove. A possible disadvantage of the internal stove is the cleaning and emptying of the stove that takes a little more time compared to an external variant.
Characteristic of the internal stove is that you are well on the fire while burning, standing at the Hot Tub you can easily look into the stove and you have better control over the process. The filler nozzle of the stove is large so that you can store large blocks of wood in it, and easily remove ash afterwards.
ADVANTAGES OF ALUMINIUM TURBO INTERIOR HEATER
The advantage of the aluminium stove is that aluminium releases heat much faster than, for example, stainless steel. You can therefore heat up the welltub hot tub within approx. 1.5-2 hours to a temperature of approx. 38 degrees. Other advantages of the installed TURBO heater are:
The heater is made of ‘marine aluminium’ and therefore has a fast heat transfer;
The upper edge of the filling opening contains a double folded edge against deformation in the event of overheating;
A solid lid wooden handle has been chosen so that you have a good grip over a hot lid.
The Plastic hot tub with internal heater comes as standard with a 15 cm diameter chimney single-walled.
the chimney is delivered as standard in 2 pieces of 1 meter stainless steel pipe with rain hat
We can also deliver spark arresters to the chimney.
If you place the Hot Tub under a canopy, we can supply you with the following:
45 or 90 degree bending
View our gallery below with nice images that we received from satisfied customers.